Industrial lighting differs from household lighting according to various parameters, it has very strict requirements put forward to it. Good industrial lighting contributes to the improvement of working conditions and, as a result, increases productivity, improves the quality of work, reduces fatigue of workers, helps to reduce the level of injuries in the workplace.
All these indicators stimulate the introduction of quality artificial lighting at the enterprise, which, in combination with natural, will give a positive result.
The requirement for industrial lighting
- The surface should be illuminated evenly and not have glare.
- The use of reflectors is mandatory, for more favorable lighting conditions and a high percentage of the use of the light flux.
- The intensity of illumination should be uniform throughout the working surface, which can be achieved by using light diffusers, special scattering lenses.
- For each production room with harmful conditions it is necessary to choose the type of LED light fitting that is most suitable for this room: a lot of dust in the air, aggressive environments, high humidity and other factors.
Additional cost savings
At any enterprise there are rooms where lighting should not be used around the clock. These are corridors, sanitary rooms, eating rooms, hygiene rooms, non-production rooms, storerooms. For optimal use of the resource of lamps and power consumption, there are a number of additions that will significantly save on lighting.
Installation of the motion sensor of the LED light, which will automatically control the switching on of the light when a person appears in the sensor control area, and turn it off when there is no activity.
Advantages of Low Bay LED lights
- Power LED lamp can be made from both direct and alternating current, which is very important for the organization of the main, as well as emergency lighting when it fails
- High power factor, which is close to 95%
- A wide range of radiation from industrial LED suspended fixtures makes it possible to select them according to the need
- Various production options (conventional, waterproof, acid-proof, heat-resistant, etc.)
- Industrial LED suspended fixtures lack flicker visible to the human eye
- Durability of work (MTBF 40,000 - 50,000 hours)
- Industrial LED suspended lamps have a wide range of operating temperatures (-40 to +40 degrees Celsius)
- Maintenance costs are reduced to zero, due to the long service life of this lighting system. With 8 hours of use per day, the service life will be 13-15 years.
